.:For details:.
Breaker 9552020601
 
HomePortalGalleryFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 Auto Control of three phase Induction motor (AT89S52)

View previous topic View next topic Go down 
AuthorMessage
Breaker
Admin
avatar

Posts : 246
Join date : 2008-10-01
Age : 28
Location : $@ngli

PostSubject: Auto Control of three phase Induction motor (AT89S52)   Mon Feb 08, 2010 9:17 pm

Auto Control of three phase Induction motor (AT89S52)

This Project can be used with the three phase Induction motors. The circuit will take the full control of the motor and it will protect the motor from several faults such us over voltage and under voltage and the circuit will switch on the motor under safety conditions.
The circuit was fully controlled by the microcontroller and the microcontroller will continuously monitors the voltages of the three phase and if the voltage goes abnormal then it will switch off the motor until they are normal. All the conditions are displayed it over the LCD display. In our project we are using the popular 8 bit microcontroller AT89S52. It is a 40 pin microcontroller.

Circuit Diagram:
Back to top Go down
View user profile http://breaker.forumotion.net
air_bijapur



Posts : 4
Join date : 2008-10-20

PostSubject: Re: Auto Control of three phase Induction motor (AT89S52)   Mon Aug 09, 2010 6:02 pm

I will tryout this first & will let you know.

Akshay: you designed it or got it ready made.
Back to top Go down
View user profile
 
Auto Control of three phase Induction motor (AT89S52)
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Silenium IDE code for selecting and ajax autopopulate dropdown item
» Selenium Remote Control misbehaves
» How to disable Remote Control page popping up?
» Selecting item from a drop down richfaces control type
» How to add auto-resize

Permissions in this forum:You cannot reply to topics in this forum
Breaker :: Funda of electronics :: Microcontroller Projects-
Jump to: